
The W210 is a dedicated BassDirect designed for corner placement in 2+2 systems. It is not a regular subwoofer, but a product which has been engineered to overcome fundamental problems when placing speakers in a room. This will complement the MH-1 - or any other speaker for that matter!
The W210 might look like a subwoofer - but it is far from being that. With its incredible precision, dynamics and incredible speed this BassDirect speaker specifically designed to work in active 2+2 systems. It is designed to load optimally to the room, blending in to a discreet position, and offering new possibilities in speaker arrangement and design. The W210 is designed to be placed in the front corners of your room making it possible to design active 2+2 systems e.g. with the MH-1s or smaller compact speaker systems.
The W210 must be operated by means of the crossover and equalization controls present in DSP section of the fully digital Lyngdorf amplifiers and room processors. Do so and a stunning experience awaits you with crossover frequencies up to 400Hz possible, freeing up the power handling of the main speakers.
And adding the Lyngdorf RoomPerfect technology to your system will of course also control the W210 in majestic fashion.
With its piano finish the W210 blends in perfectly in any environment; - ask your dealer for a demonstration of a 2+2 system we promise you that you are in for an "ear opening" experience!

A conventinal subwoofer is only capable of reproducing the deepest bass - below say 120Hz - hence the name subwoofer.
When using the Lyngdorf W210 BassDirect speaker you typically cross over to the main speakers around 400Hz - or even higher!
Read more...
Conventional subwoofers are designed with heavy cones, large magnet systems, and very poor efficiency due to the heavy moving systems. The moving mass in todays subwoofers can easily exceed several hundred grams. The W210 is designed in a completely different manner with a high speed lightweight driver granting a frequency response which is linear way up into the midrange area.
Read more...
The cabinet is shaped to fit into the corners of a room which gives the further advantage that all surfaces of the cabinet are as small as possible. This together with the 22mm thick MDF board used for building the cabinet ensures an extremely rigid and vibration free construction.
Read more...